Loading Paper in the Rear Paper Feed Slot

Feed slot cover, loading paper in...

If you are printing from the product's control panel, press the start button.

No limit texas holdem strategy

If you are printing from feed slot cover computer, click Print. Slide the edge guides against the paper or feed slot cover, but not too tightly. Slide out the paper support. Slide the edge guides outward. Slide the edge guides outward. Load a single sheet of paper or thick media, printable side up and short edge first, in the center of the rear paper feed slot.

When you time slot ready to print, press the Start button. Do one of the following: You see a message on the LCD screen, then you see instructions for loading paper. Check the paper package for any additional loading instructions. Loading Paper in the Rear Paper Feed Slot You can load one sheet of card stock or other thick media, one sheet of paper, or one envelope in the rear paper feed slot.

Paper that is too stiff may not load correctly. Load a sheet of loose-leaf or other paper with holes as shown, approximately 2 inches 5 cm into the slot.

Casino big hits

Check the paper package for any additional loading instructions. Push it approximately 2 inches 5 cm into the slot. Paper that is too stiff may not load correctly.

Roulette 1-12 payout

Always follow these loading guidelines: Load a single sheet of paper or thick media, printable side up and short edge first, in the center of the rear paper feed slot cover slot.

Leave enough space in front of the product for the paper to be fully ejected. Flip open the rear paper feed slot cover. When you are ready to print, press the start button.

Load one sheet slot sketch nx envelope at a time. Leave enough space in front of the product for the paper to be fully ejected.

Casino rama travis tritt

Flip open the rear paper feed slot cover. Load the paper or envelope short edge first and printable side faceup. Check the paper specifications. If ink smears when you print on thick paper, you can select the Thick Paper setting to improve print quality.

The output tray opens automatically when you print. Push it down approximately 2 inches 5 cm into the slot. If you are printing from the feed slot cover control panel, press the Start button. Always follow these loading guidelines: Load one sheet or envelope at a time. Load a sheet feed slot cover loose-leaf or other paper with holes as shown, and push it approximately 2 inches 5 cm into the slot.